Quote:
Originally Posted by larry_bml
To code it on your car, you will need an modified FA, use one from an F10 series, but put your VIN into it, and your car options.
I was looking for codable parameters for parking brake too, but I didn't find anything. So I hope that someone with much more experience, can find some parameters in cluster firmware or an modified CAFD, to cancel that error. About fuel, I'm not sure what is all about, but I read on a rusian forum, where someone finalized this retrofit, but he used an emulator for parking brake.
I hope that we can finalize this too, one way or another.
|
Yes I have the modified F10 FA already, had that done before the cluster came in but I believe there was an issue with the eeprom chip when it got removed from the board, and it isn't working correctly now. I have another 6WB on the way to try.
I'd be interested to see how the emulator for the parking brake would work. Once I get the cluster in this week and get it properly coded, then I can start looking into the parking brake. Do you have the link for that forum where the emulator was mentioned?
Of course, I'd love to be able to just retrofit the electronic parking brake
EDIT: Just a quick thought. Maybe it is something to do with the Auto-Hold feature that is on the F10 parking brake switch, since the EMF(F10 brake module) controls that as well, and perhaps the new Kombi is looking for something to do with that. You could check to see if there is anything in the Kombi coding related to that.