Quote:
Originally Posted by Bobafet7
I installed the oem rear bump stops. Since the Bilstein B8's are new, I'm just hoping to keep them and install a different set of springs that will lift the car a bit more and make the suspension a little more forgiving. Went on the Eibach website and for my car I only see 1 option for lowering springs.
PRO-KIT Performance Springs (Set of 4 Springs)
BMW 328i xDrive Sedan AWD F30
E10-20-031-04-22
0.8 in (Front) 0.6 in (Rear)
Called Eibach and they dont list a spring specifically for my 328d Xdrive but recommend that the 06-22 would be the best bet. Whats your feedback on this please? Guess diesel have a heavier front end. as the rear springs are all the same for 04,05,06-22 spring kits. Only front springs differ.
|
I think the oem bump stops are definitely too long for the amount of drop on your springs so that could be your issue possibly.
Yes they don’t seem to list 328dX in the Eibach catalogues but I would suspect it to be the same as 330dX, what are your axle weights? There should be a sticker in your door shut by the tyre label. Has 4 weights on, the bottom 2 numbered 1 & 2 are what you’re after.