Quote:
Originally Posted by roxxor
There should be a total of 6 wires, 1 data line from each sensor plus the power and the ground which in the loom are split and run to each sensor. The brown connector is 1 part of the 2 connectors in that specific REM plug, just with the cover removed to be able to add/remove wires.
F20 should be the same as F30 as far as coding changes, however just to make sure, did your REM have the correct pins for the PDC?
|
I just checked it today and looks like [Lucky ME ^^] it actually has it, I have already retrofitrd the sensors on the bumper and got the cable in the boot. Also I have ESYS ready. However I'm not planing to get the PDC button yet - would that be okay? And can you please advice me on how to take the plug out (from the bundle)? Moreover I got the cable into the boot from an air duct which it's shown in my pics, do you think it's a good idea?!
