View Single Post
      03-21-2014, 06:30 PM   #18
nyc_king
New Member
United_States
8
Rep
19
Posts

Drives: 2013 328i xDrive M Sport
Join Date: Jun 2013
Location: NYC

iTrader: (0)

Quote:
Originally Posted by HFW003 View Post
You can try Tool32 and with thanks to Shawnsheridan, this is how you do it.

There are two versions of Tool32 in EDIABAS so make sure you use the German version as the English one won't work.

Assuming the fault condition no longer exists, to clear the fault code.

1) Launch C:\EDIABAS\Bin\TOOL32.EXE
2) Hit F3
3) Load C:\EDIABAS\Ecu\F01.PRG
4) In the "Select Job: F01" window, select FS_LOESCHEN_FUNKTIONAL
5) Hit F5
6) "Results" window should show "JOB_STATUS = OKAY"

Hopefully, Problem Solved.
Note: fs_lesen_funktional only read fault codes, FS_LOESCHEN_FUNKTIONAL will delete it.

Good luck

H
Hi, So this happened to me as well but I am running E-sys 3.24.3 and there is no EDIABAS folder. Is there another way to clear this with E-Sys?
Appreciate 0