Quote:
Originally Posted by Kel918
Also had someone 3d print the vortech v3 centrifugal supercharger compressor side, so I can start doing measurements on where would be the best fit for it. I might have to go with rotrex if its too big though
|
Bolt In HPFP solution has been solved in the last month or so
http://spoolperformance.us/index.php...product_id=105
The B58TU (from the Supra) is the only stock HPFP that is considered an upgrade to the N20, it does fit and will bolt into the housing and connect to the harness with minor adjustments. However the inlet and outlet ports on the pump face different orientations to the stock N20 pump. meaning custom Hard HPFP lines need to be made.
Considering most of those A90 Supra HPFP's go for close to what the Spool FX150 is selling for, then you add the cost of the additional parts to get the B58TU HPFP to work. It would be cheaper to just buy the Spool FX150 and have the tune flashed with new HPFP calibration data.
Alternatively Port injection kits already exist for the N20 which are cheaper than a HPFP upgrade.