Quote:
Originally Posted by dexterdpc
Hey guys - I have a 2014 US 328d with old CIC. Just finished the LCI blackline upgrade and if you follow BMW's instructions on their wiring harness part 61122410220 (I recommend their part), and code with Bimmercode, no wire tap is needed to get the inner blinkers working if you code it per the below.
Attached are my pics installed. (Rear fog lights work too. Too much light for the picture - see other places on bimmerpost to get those operating).
Here is the coding that works so you can plug the new trunk lid harness wires into the car wiring:
REM > 3061 LceOutputChannels > BFD_L_CCM = ccm_blinker_l
REM > 3061 LceOutputChannels > BFD_L_IS_LED = aktiv
REM > 3061 LceOutputChannels > BFD_L_UE_SPG_SCHUTZ = dimmed
REM > 3061 LceOutputChannels > BFD_R_CCM = ccm_blinker_r
REM > 3061 LceOutputChannels > BFD_R_IS_LED = aktiv
REM > 3061 LceOutputChannels > BFD_R_UE_SPG_SCHUTZ = dimmed
REM > 3061 LceOutputChannels > BL_L_IS_LED = aktiv
REM > 3061 LceOutputChannels > BL_L_KALTUEBERWACHUNG = nicht_aktiv
REM > 3061 LceOutputChannels > BL_L_UE_SPG_SCHUTZ = nicht_aktiv
REM > 3061 LceOutputChannels > BL_R_IS_LED = aktiv
REM > 3061 LceOutputChannels > BL_R_KALTUEBERWACHUNG = nicht_aktiv
REM > 3061 LceOutputChannels > BL_R_UE_SPG_SCHUTZ = nicht_aktiv
REM > 3061 LceOutputChannels > FRA_H_L_IS_LED = aktiv
REM > 3061 LceOutputChannels > FRA_H_L_KALTUEBERWACHUNG = nicht_aktiv
REM > 3061 LceOutputChannels > FRA_H_L_WARMUEBERWACHUNG = aktiv
REM > 3061 LceOutputChannels > FRA_H_R_IS_LED = aktiv
REM > 3061 LceOutputChannels > FRA_H_R_KALTUEBERWACHUNG = nicht_aktiv
REM > 3061 LceOutputChannels > FRA_H_R_WARMUEBERWACHUNG = aktiv
REM > 3061 LceOutputChannels > NSL_L_IS_LED = aktiv
REM > 3061 LceOutputChannels > NSL_L_KALTUEBERWACHUNG = nicht_aktiv
REM > 3061 LceOutputChannels > NSL_L_UE_SPG_SCHUTZ = aktiv
REM > 3061 LceOutputChannels > NSL_L_WARMUEBERWACHUNG = nicht_aktiv
REM > 3061 LceOutputChannels > NSL_R_CCM = NEW_ccm_nsl_r
REM > 3061 LceOutputChannels > NSL_R_IS_LED = aktiv
REM > 3061 LceOutputChannels > NSL_R_KALTUEBERWACHUNG = nicht_aktiv
REM > 3061 LceOutputChannels > NSL_R_UE_SPG_SCHUTZ = aktiv
REM > 3061 LceOutputChannels > NSL_R_WARMUEBERWACHUNG = nicht_aktiv
REM > 3061 LceOutputChannels > RFS_L_CCM = NEW_ccm_rfs_l
REM > 3061 LceOutputChannels > SL_2_L_CCM = Fxx_ccm_sl_2_l
REM > 3061 LceOutputChannels > SL_2_L_IS_LED = aktiv
REM > 3061 LceOutputChannels > SL_2_R_CCM = Fxx_ccm_sl_2_r
REM > 3061 LceOutputChannels > SL_2_R_IS_LED = aktiv
REM > 3061 LceOutputChannels > SL_L_IS_LED = aktiv
REM > 3061 LceOutputChannels > SL_R_IS_LED = aktiv
REM > 3062 LceLampMapping1 > MAPPING_BLINKER_H_L_FIXED_PWM = fixed
REM > 3062 LceLampMapping1 > MAPPING_BLINKER_H_L_PWM_LEVEL_1 = 13.7V
REM > 3062 LceLampMapping1 > MAPPING_BLINKER_H_R_FIXED_PWM = fixed
REM > 3062 LceLampMapping1 > MAPPING_BLINKER_H_R_PWM_LEVEL_1 = 13.7V
REM > 3062 LceLampMapping1 > MAPPING_BRAKEFORCED_L_FIXED_PWM = fixed
REM > 3062 LceLampMapping1 > MAPPING_BRAKEFORCED_L_PWM_LEVEL_1 = 100%
REM > 3062 LceLampMapping1 > MAPPING_BRAKEFORCED_R_FIXED_PWM = fixed
REM > 3062 LceLampMapping1 > MAPPING_BRAKEFORCED_R_PWM_LEVEL_1 = 100%
REM > 3062 LceLampMapping1 > MAPPING_BREMSL_L_FIXED_PWM = fixed
REM > 3062 LceLampMapping1 > MAPPING_BREMSL_L_PWM_LEVEL_1 = 13.5V
REM > 3062 LceLampMapping1 > MAPPING_BREMSL_R_FIXED_PWM = fixed
REM > 3062 LceLampMapping1 > MAPPING_BREMSL_R_PWM_LEVEL_1 = 13.5V
REM > 3063 LceLampMapping2 > MAPPING_NEBELSCHLUSSL_L_FIXED_PWM = fixed
REM > 3063 LceLampMapping2 > MAPPING_NEBELSCHLUSSL_L_PWM_LEVEL_1 = 13.5V
REM > 3063 LceLampMapping2 > MAPPING_NEBELSCHLUSSL_R_FIXED_PWM = fixed
REM > 3063 LceLampMapping2 > MAPPING_NEBELSCHLUSSL_R_PWM_LEVEL_1 = 13.5V
REM > 3063 LceLampMapping2 > MAPPING_RUECKFAHRL_L_PWM_LEVEL_1 = 13.7V
REM > 3063 LceLampMapping2 > MAPPING_RUECKFAHRL_R_PWM_LEVEL_1 = 13.7V
REM > 3063 LceLampMapping2 > MAPPING_UNIVERSAL_6_OUTPUT = sl_2_l
REM > 3063 LceLampMapping2 > MAPPING_UNIVERSAL_7_OUTPUT = sl_2_r
REM > 3063 LceLampMapping2 > MAPPING_UNIVERSAL_8_OUTPUT = bfd_l
REM > 3063 LceLampMapping2 > MAPPING_UNIVERSAL_9_OUTPUT = bfd_r
|
Thanks for sharing mate, i can do with that coding, i canīt by OP.
F80 My15
Cheers
