Quote:
Originally Posted by atzebmw
I also have to ask now.
My F30 LCI from 07/2015 (german car) with adaptive LEDs has some other values.
I have both FLE ecus and cafd CAFD_000024C3…
LM_ID_LT01 F020Wert = 01 LM01 ?
LM_ID_LT02 F020Wert = 02 LM02 ?
LM_ID_LT03 F030Wert = 03 LM03 ?
LM_ID_LT04 F020Wert = 00
LM_ID_LT05 F020Wert = 05
LM_ID_LT06 F020Wert = 06
LM_ID_LT07 F020Wert = 07 LM07 ?
LM_ID_LT08 F020Wert = 08 LM08 ?
LM_ID_LT09 F020Wert = 00
LM_ID_LT10 F020Wert = 00
BLINKEN_Idx
F030Wert
Werte=03, 03, 03, 03, 03, 03, 03, 0F, 03, 03
BLINKEN_PO_Idx
F030Wert
Werte=03, 03, 03, 03, 03, 03, 03, 0F, 03, 03
Also i don’t find LM01 value.
Next to the LM_ID_LT01-10 i only find LM01_Name.
What should i have to code?
|
Because you have adaptive the mappings to each module will be slightly different to the ones shown previously but the principal should be the same as in
THIS POST. You need to find which bit that controls the DRL rings (I suspect it's the same as in the non-adaptive). However, your LmmIdx-- Values are different to non-adaptive and you will need to map out what each value means in the LmmIdx (second excel table in
THIS POST.) You may not be able to use 0A for the custom value as it may already be assigned.
Without seeing the CADF or NCD file it's difficult to say exactly but it should be possible.