Quote:
Originally Posted by thornfrog
Hi,
I just undo-ed the Adaptive light DIY and went back to original halogen light.
I'm sure I correctly undo all the wiring (headlight connectors and the fem body).
For the coding
1. I removed 522 and 524. Briefly, I deleted 522, 524 from the FA's SALAPA and hit 'Apply changes' then wrote FA & FP from the VCM Master tab.
2. I did VO code FEM_BODY. Right click the FEM_BODY and select code.
3. I checked the CAFD under the FEM_BODY so all the Adaptive related setting are set to 'disable'
4. Just to be sure I FDL_Code the CAFD.
The halogen lighting does work fine: DRL, low & high beam, parking lamps, fog lights are all functioning okay.
My problem is I'm getting an error on my dash saying
"Adaptive headlight malfunction."
Please help. How to get rid of this error?
|
UPDATE:
I figured it out and fixed it.
I just had to disconnect the battery and wait 10 ~ 15 seconds.
The error's gone after I reconnect the battery.
PM me if you want to buy fully functioning, complete adaptive headlights