Thanks guys, appreciate it!
Added new links to a video and a photo album in the second post, will start working on the diy guide. Might take some time to finish though, will keep updating as I go.
Quote:
Originally Posted by ooshnoo
You gotta specific link to purchase the controller?
|
The controller is a custom built part, same as the led modules, but the most important part of it is the digispark, you can buy it
here for example.
For reference, below is what my board looks like, before going in a box in the car. Might look complicated, but it's really not:
- tiny usb board is the digispark
- the blue rectangular board is a step down dc-dc converter (optional - if choosing to power the board directly to 12V)
- the 4 resistors are there to make 2 small voltage dividers for the digispark inputs
Everything else is just the prototype board, few wires and connectors. The orange/white cables are the inputs(from the car), the blue/red wires are the outputs(going to the lights). The 2 pins left unconnected are for power.