View Single Post
      09-25-2019, 06:00 AM   #7
1QuikWS6
No 55mph
1QuikWS6's Avatar
United_States
1239
Rep
7,949
Posts

Drives: F32 435ix MSport ->M6
Join Date: Jul 2009
Location: Blitzburgh, PA

iTrader: (103)

Garage List
Quote:
Originally Posted by RAK92 View Post
Yep, this is normal. There are no drain holes. Again, someone posted a pic with a hole drilled into the plastic to allow the water to drain. I just donít know whatís underneath so not sure if thatís a safe option.

Every time I was my 2016 435i, after rinsing, I immediately open the hood and take an old towel and blot out the pooled water in those areas first. Itís not just become a habit to get that water out.
I drilled a hole on my 435 - the water will then drain down to the lower piece of plastic exactly where the little 'funnel' is that directs rest of water down thru the normal drain route to underneath the car

Been that way for yrs, no harm done, there is nothing in the path of the water draining that will get damaged

Just because BMW didn't put one there originally doesn't mean that putting a hole in is a bad thing - there is a TSB out for the very bottom drain vent that BMW DID put in that needs to be removed due to the fact that it clogs and water will NOT drain completely - so it's not like BMW engineering is foolproof
__________________
F32 435ix//Mineral Gray Metallic//M Sport-Prem-Tech-Driver Assist-Lighting-Cold Weather-Dyn Handling Pkgs//M4 Black Leather Int w/M4 Alum Blade Trim//HK Sound+Musicar Stg3//763M Wheels//M4 Euro LCI Tails//M4 Mirrors w/CF Covers//AWCarbon CF F/R Spoiler-LED Sills-CF Shift Knob/Surround/IND M4 Alcantara Armrest//PURE S2 Turbo//AA FMIC+DP//ER CP+TIC//3.5bar TMAP/DV+//AWE Tuning Exhaust w/CF Tips//Dinan CF Intake//BM3 Cary Jordan Tune//MPerf Diff