Quote:
Originally Posted by johnung
Quote:
Originally Posted by xpro
Quote:
Originally Posted by thatBimmerBloke
Quote:
Originally Posted by xpro
See here Eibach 05-22 kit on a 335 Xdrive.
|
I see you went with the E10-20-031-02-22 springs. For the same part number, Eibach claims 1.6/1.4" front/rear drop for 335 RWD and 1.0/0.6" drop for 340 RWD. That's a huge difference. |
The part you listed might be for a RWD, not sure.
I used 05-22 kit initially, then changed to 06-22 set up later which is slightly higher.
These were the part numbers for XDrive which my car is.
Too low looks nice, but as people forget an absolute pain to drive around. |
FYI- Eibach is not a one size fits all kind of supplier. It's always important to check their website for the proper part number for your model. There are different F3x Eibach kits depending on things like weight. I noticed that they have a different spring kit for 4-cylinder and 6-cylinder models. |
There are 2 kits available for the same car, speaking about 330xd,335xd&335ix and 340ix.
The only difference on those two kits is the front axle loading.
One sits slightly lower then other. Apart from that, they are identical and listed under all of the above vehicles.
Photo below here is with the later 06-22 kit and higher axle loading.