Quote:
Originally Posted by RSnic
Money For,
If you already have rear PDCs, the you'll add 508 car's option list (SALAPA) in the FA/VO. Then VO code the car; it's recommended that you do all ECUs, but at least VO code REM, ICM, HU_NBT & FEM
That should do it
|
Hi,
Thanks for replying, i had allready the rear PDC's and retrofitted the front. I added the 508 in SALAPA and tryed to VO code them into the car. But I ran in some problems that resulted in airbag en seatbelt errors. That is solved now so i can go back to try and code the front PDC's. My question is do I need to remove the 507 option and put only the 508 in them becase in my firt attempt I left the 507 also.
The best case was that the front PDC's worked after my coding but they did show up on the rear animation on the idrive and not on the front if you understand what I mean. While driving around coded like that some other options like my auto cruise control failed and the sound of the PDC went away completly. So i removed that coding and everything else just worked fine again.
gr K