Quote:
Originally Posted by Furkan Akyon
Quote:
Originally Posted by Jhnblckwood
Did u tru vo coding kombi and hu with 609 and 6wa in FA?
|
I haven't but I will, is that the codes I should change ?
and if there are some missing or extra codes can you tell them ?
KOMBI L7_MID > Anzeige_Konfiguration 3000 > NAVI_NBT_ENABLE = kein_nbt [Default]
KOMBI L7_MID > Anzeige_Konfiguration 3000 > NAVICOLOR_TABLE = alte_farbtabelle [Default]
KOMBI L7_MID > ERM_Konfiguration 3004 > DISP_DCRN_ASST_APPL = nicht_aktiv [Default]
KOMBI L7_MID > FZG_Ausstattung 3003 > HUD_ENTERTAINMENT_MOST_ENABLE = nicht_aktiv [Default]
KOMBI L7_MID > FZG_Ausstattung 3003 > HUD_NAVI_ENABLE = nicht_aktiv [Default]
KOMBI L7_MID > FZG_Ausstattung 3003 > NAVI_VERBAUT = navi
KOMBI L7_MID > FZG_Ausstattung 3003 > VZA_ENABLE = nicht_aktiv [Default]
KOMBI L7_MID > PIA_Einheiten 3008 > HUD_PIA_NAVI = nicht_aktiv [Default]
KOMBI L7_MID > PIA_Einheiten 3008 > KI_PIA_ANKUNFT = aktiv
KOMBI L7_MID > PIA_Einheiten 3008 > KI_PIA_DISTANZ = aktiv
KOMBI L7_MID > PIA_Einheiten 3008 > KI_PIA_NAVI = aktiv
HU_NBT > EXBOX 3001 > KOMBI_CIC = kombi_mid
HU_NBT > EXBOX 3001 > SETTINGS_INFO_DISPLAY = aktiv [Default]
HU_NBT > HMI 3000 > BASIS_KOMBI_MMI_LIST = nicht_aktiv [Default]
HU_NBT > HMI 3000 > HIST_GAS_CONSUMP = aktiv
HU_NBT > SYSTEM_EINSTELLUNGEN 3004 > EXTERNE_MOST_DIAG = aktiv
HU_NBT > SYSTEM_EINSTELLUNGEN 3004 > EXTERNER_MOST = aktiv |
I don't kno all the codes by heart n not by computer to Check but that's why u VO code with 609 and 6wa in FA because esys will change all the values necessary automatically