View Single Post
      03-04-2019, 02:53 PM   #1
BimmerPost Supporting Vendor's Avatar

Drives: 2007 e92 335i / 2013 F30 328
Join Date: Sep 2013
Location: Las Vegas

iTrader: (19)

Talking 15% OFF Evolution Racewerks Intercooler - March Madness Sale!

15% OFF + Free Shipping - March Madness Sale

Order Link

  • Not only this intercooler fits well and does an amazing cooling job, it also looks good once installed
  • Made in the US. Superb finish quality that sets this intercooler apart from the competition
  • Large High density bar and plate design intercooler with the following dimensions 20"x11"x3" (26"x11"x3" with end tanks)
  • Offered in brushed, polished or anodized black finish
  • Fully compatible with stock piping or aftermarket charge pipes
  • This intercooler does not require any trimming. It is a 100% fully bolt on part
  • Offered with Extreme Power House customer satisfaction guarantee, if you do not like it you can return it no questions asked
  • Evolution Racewerks lifetime warranty

Why replace stock intercooler?
The Evolution Racewerks (ER) F chassis intercooler is a massive 20"x11"x3" (26"x11"x3" with end tanks) core. It is 660 cubic inches of very efficient high density core versus the stock intercooler which features 425 cubic inches only. The Evolution Racewerks intercooler’s core is 35% larger than stock

How does the ER intercooler compare to other brands?
The ER intercooler does not only differ from other brand by the massive size of the FMIC, it also offers the best fin density available. Fin density is very important because it is the main heat transfer surface, with more fin density you get more surface area allowing the air to get cooler while transferring through the intercooler. Ebay cheap intercoolers use 8 fins per square inch; most competition intercoolers use 12 fins per square inch. Evolution Racewerks intercooler uses 20 fins per square inch. With more fins ER FMIC is able to provide the same performance as competition with an intercooler half the size. Now imagine the performance gains you will be getting with an intercooler of same if not bigger size.

Independent Testing
Evolution Racewerks sent their intercooler for independent testing by other manufacturers / customers are the results are in. ER intercooler was able to keep temps at 7 degrees lower than stock intercooler before the beginning of the pull. During a 4th gear pull, ER intercooler kept the temps stable at 70 degrees versus the stock intercooler temps which went up to 105. When doing multiple gear pulls (2, 3 and 4th gear pull), ER intercooler managed to keep IAT temps around 80 degrees versus stock intercooler temps which were at 120 degrees.
One of the other advantages of the Evolution Racewerks intercooler is the piping design. The ER FMIC has shorter piping with less bends which will provide better air flow.

Evolution Racewerks F chassis intercooler is offered in standard brushed finish with the option to get the polished or anodized black finish. We stock these intercooler in all the available finishes, when you order from us expect your intercooler to ship out same day. Other dealers do not stock these intercoolers, ordering from them might mean waiting weeks for the anodizing process.