|
Ok.. DP is out.
No staining or marks around the upper V band so I think that was ok. I pulled the O2 sensors and reinstalled at 50nm with anti-seize on the threads. If you do this, there are warnings ALL OVER about dont get it on the sensor portion, just the threads, be careful.
The one thing I notice is that the O2's were significantly lighter color just a few days ago when I did the change.. they are COAL black now. Probably nothing.. just an interesting point.
I am sure they were not in at 50nm, but they are now.
Reinstall coming next, especially double checking that lower V band this time.
|