View Single Post
      09-10-2020, 05:42 PM   #10
Expert@ApexWheels
BimmerPost Supporting Vendor
Expert@ApexWheels's Avatar
3511
Rep
6,731
Posts


Drives: M3
Join Date: Jun 2012
Location: Bay Area

iTrader: (0)

APEX Forged: Stronger than ever and ready to ship.

Our new forged offerings have significantly higher load ratings with over 1000 LBS of additional capacity for 4 wheels in an 18" diameter compared to our already strong flow-formed wheels! The increase in load rating allows these new wheels to better cope with the demands that sticky tires, heavy cars, and high downforce present.

Check out this F30 on our ARC-8Rs:







Specs:

ARC-8R Brushed clear
Front: 17x9" ET42 with 12mm spacers to clear coilovers
Rear: 17x9" ET42 with no spacers
255/40-17 tires all around
Rear camber was maxed out to fit the owner's other setup which uses a 18x9.5" ET35 ARC-8 on the rear with 275/35-18 tires.

__________________

Last edited by Expert@ApexWheels; 12-16-2020 at 04:08 PM..
Appreciate 0