View Single Post
      07-02-2019, 12:43 PM   #78
Enabled
Captain
225
Rep
661
Posts

Drives: 328xd Wagon
Join Date: Jun 2018
Location: Houston

iTrader: (0)

Quote:
Originally Posted by e46m3to335i View Post
Care to go into detail on how to disable the AWD via FDL Coding?? First I've heard that this can be done via Esys.

-Nick

DSC > 3000 > C_Funktion_LaengsMomentVerteilung_aktiv_e > aktiv to nicht_aktiv

You will get a DSC fault for "Subfunction coded out", meaning that the DSC system is checking against the VCM for vehicle type, and finding out it was tricked.

However everything works fine as it should, and you still have all your modes available. The transfer case actuator will remain open.
There are a couple of ways to get the DSC to not have that error and check control message, but that's beyond the scope here. Any esys expert can take care of that, changing vehicle type, etc.

Then have some fun. I could have roasted the tires a bit more in place, but this was my dad's driveway. Permanently burned 11s not appreciated.
Attached Images
 
__________________
-2014 328d Wagon 2WD, 8HP flash, self-tuned, 250hp/420ft-lbs.
Others
-E36 328is ~210-220whp: Lots of Mods. 2000 Z3 Roady. 2003 VW Jetta TDI Manual 47-50mpg Modded. S52 Estoril Z3M Coupe.