View Single Post
      02-09-2020, 08:18 PM   #236
5mall5nail5
Not stock
5mall5nail5's Avatar
United_States
360
Rep
506
Posts

Drives: E34 525i Turbo
Join Date: Oct 2008
Location: PA

iTrader: (0)

Send a message via AIM to 5mall5nail5
Quote:
Originally Posted by YuminNuman View Post
I got the yellow kit a few weeks ago. To be honest I'm not too thrilled on the color, there's a bit of a weird green in it. It's like that Austin yellow the f80 comes in.

I'm about ready to install them. I decided to go with ebc redstuff pads over the ones that came in the kit. If anyone wants a new set of the pads, for sale, msg me. I don't think I need these dust shields either.

I also got the stoptech lines. I'm just going to stick with the pentosyn dot 4 lv. Do I really need the computer to bleed, can't I just tap the calipers and the abs pump thing with a rubber mallet? I feel like that's in the same category as using a torque wrench for everything.

There were a few posts about the rear caliper bolts being difficult to get at. Any issues back there, I would think an impact can fit?
Yeah I almost went yellow - its like Phoenix Yellow. Its like baby barf. I decided on orange.

And yes - I used a pressure bleeder w/o issue at all. I use these:



Clamp off the lines or act quick and no risk of air getting up into the modules. That's when you need the computer assist bleed.
__________________
2015 BSM 328i Sport Line - BSM - 18" Style 397 - OEM BMW Performance Black Grill
2015 BSM X1 M Sport - BSM - 19" Style 225
1992 525i - Built 2.9L "M50" - Precision 7675 turbo, DTA standalone ECU, custom everything
1987 325e - M52 2.8L 24v swap
johnung1236.50