|
Hey guys, here’s some feedback from Wagner regarding Evo 3 Comp transient flow/throttle response and brace strength:
“Point 1: The increase of internal charge air volume doesn't affect response noticeable, but the less pressure drop affect response behavior positively!
Point 2: The brace was designed with help of FEM simulations, to match with carrying capacity of stock mounted brace. Therefore we use 4mm wall thickness with additional reinforcement. The crash safety aspects shouldn´t be affected.”
The 25F lower IAT vs the Evo 2 Comp is pretty damn impressive, and it weighs less than 30lbs bc it’s tube & fin which should also continue the trend I’ve seen on track of the Wagner Comp’s cooling off faster bn pulls vs bar & plate IC’s.
This is very tempting for those hot summer track days!
|