To pull the "open file" needed for the FSC Generator download ZIP LINK:
https://www.e90post.com/forums/attac...5&d=1518522964
1. Unpack the ZIP file (1b.zip) to the root of an empty USB stick (aka. jump, flash or pen drive and/or "stick".
(be sure to use an empty drive and format the drive as FAT32)
2. Power on your car (ignition on is fine, you don't need to start your car) and wait until the navigation system has started completely
3. Put the USB stick in the USB port in the glove box or console, depending on vehicle.
4. Wait for around 30 seconds
5. Remove the USB stick from the port in the glove box and put it in your (windows) computer
6. Check if the file 1b.hex is present on the USB sticK, THIS IS the "OPEN FILE", save this to your computer and point the code generator to it.