Quote:
Originally Posted by roxxor
Prep Work:
- The first thing you will want to do before ordering parts for this retrofit is to check your REM module to see if you already have the correct pins for the PDC sensors. Remove the far left connector, and use the picture below as a reference guide. If you do not have the pins in the highlighted box, you will need to replace the REM.
|
I'm still in the process of gathering all my parts and prob the most significant one is the REM. I'm so confused why there are so many different REM parts ...
Roxxor shows the 175 above without the PDC connector and the 700 that has the PDC connector. I have the 61359329702 with no PDC connector, and when i do a search on the 700 on Ebay, the search returns two other REMs:
61359329701 and also the
61359329704 that both have the PDC connectors. There's OEM part numbers and interchange part numbers, and supposedly all these are compatible with the F30. But of course the 175, 701, 704, and even my own 702 don't show up in Realoem.com
Ahhhhggggghhhh