I followed this guide and like you was sent short cables that wouldn't reach the F36 REM.
If you have no inner lights at all I would say the harness is faulty. I'd expect some of the lights still to work though if the harness was incorrectly wired.
Quote:
Originally Posted by Mick.86uk
I used the harness below.
https://www.ebay.co.uk/itm/BMW-F32-F...sAAOSw8ttc-USX
I didn't connect the indicator wires directly into the REM, instead I posi tapped onto the existing outer indicator wires using connectors from amazon.
Left indicator: black & white striped wire running into the far right plug on the REM module
Right indicator - grey & black striped wire running in the left plug on the REM module (not middle)
https://www.amazon.co.uk/Connectors-...3323&psc=1
All I needed to code was all rear lamps to LED from Bulb. Very simple with the bimmercode app. |