Quote:
Originally Posted by enemigo13
logs should be done after some WOT pulls. as this ecu will target less right after writing or e.g. after 1-2 WOT pulls. It needs more to make adaptations. Usually stage 1 gives ~1.1 bar (16psi) at ~6200rpm, stage2 gives 1.3 bar (19psi) at the same rpms.
|
Can you post a stage 2 log that targets 19psi? We have multiple logs posted here and in the fb group that only targets 16.
I also don't see why that's a limitation of the stock downpipe. Why can't we run more boost on Stage 1?