Quote:
Originally Posted by alex_msu
SI B51 22 12
Body Equipment
This Service Information bulletin supersedes SI B5122 12 dated June 2012.
designates changes to this revision
SUBJECT
Wind Noise from Front Door Window Seal by Side Mirror
MODEL
F30
From start of production (SOP) to June 2012
SITUATION
The front window may have wind noise by the side mirror when driving.
CAUSE
The window guide seal is not properly fitted to thedoor.
PROCEDURE
With the window closed, confirm the location of thedeformed (folded-in) window guide seal near the mirror
triangle, and then proceed to the next step.
1. On the affected front door, check
both sides of the seal and locate
the folded-in area.
2. This close-up shows the folded-in seal area. Insert a narrow
nylon tool from above the fold
and between the window glass
and seal. Gently work the tool
downward, and pry the seal
outward to eliminate the folded
area.
3. Confirm that both the inside and
outside of the front window glass
are parallel to the seal and
uniform with no folds. The
window must remain closed for a
minimum of two hours for the
seal to “learn” the new position
|
Can you include the mentioned pictures too?