Quote:
Originally Posted by Shadar
In ESYS I can't code HU_NBT with VO containing 3AG. By the past I already did VO code NBT adding 6NK without problem. If I add 3AG to activated VO I get an error when coding NBT... below extract of the log (partially masked VIN )
|
The WDBI_Plain error happens most when there is something wrong with the VO.
So, please check again your VO.
It is best to load the original and unchanged VO.
Or you could try to remove the 6NK.
I also read of problems when the 698 is in the VO.