View Single Post
      01-27-2015, 09:21 AM   #88
Enlisted Member

Drives: F48 X1 192HP MINERAL GREY
Join Date: Dec 2012
Location: home

iTrader: (0)

Originally Posted by shawnsheridan View Post
I suspected as much. You must inject CAFD into DME and then VO Code it.

Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on DME => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown => Select OK => Right-Click on DME (the ECU itself not the underlying CAFD) => Select CODE.

With DME, Motor cannot be running when you code it.
Hi Shawn,

thanks for your help. I was able to fix this problem.

I only have one problem that i don't get away. After coding my rear PDC stopped working. every time i put it in reverse i get error "no parking assistance, have the problem checked by service"

I already have put the old CAFD for Hu-CIC and REM, but the problem remains.
any suggestions?