OK. So $1,000,000 is ridiculous. These are just taking up space in my garage. 2020 Garage Cleaning. Willing to take reasonable offers.
S3 2 piece wheels
Purchased new for $8,570. $10k with tires.
6061-T6 Forged Aluminum
Hand Brushed Candy Black and Gloss Clear Finish. Exposed Gloss Black Hardware
19x9 ET 35 Front
19x10 ET 42 Rear
MPSS 245/40/19 8/32" Front
MPSS 275/35/19 6/32" Rear
formerly on a F30 lowered way too far right now.
About Velos S3:
http://www.velosdesignwerks.com/whee...forged-wheels/
For reference, the wheels are same at 437m at 19" with front at 9.0" and rear at 10.0"
ET in front is 35mm where 437m (and 666m) are 29mm, a difference of 6mm inward. If you feel this is an issue (it's not), you can use a 5mm spacer to make up the difference.
There is only 2mm difference in rear to 437m and 666m at 42 ET VS 40 ET.
The Front Drivers wheel has curb rash. Velos says they can rebuild as new for $695 (Nice part of the 2 part Design). You might have a repair place that can do it locally for less. Or they can repair and change finish of all 4 for $1500. Your choice.
You can end up with an essentially new set of Velos S3, normally $10k, for $1500 + what we agree on.
Again, only reason doing this is I need to clear room in the garage! I'd like to get my Bimmer back in there!