Quote:
Originally Posted by WrxToBeamerGuy
Thank you!
|
I know this is not the appropriate thread for this but maybe some other people wondered how I did it. Anyways here you go! Pretty simple nothing crazy. All I did was get a nut and bolt and utilized the existing BMS Oil Catch can bracket and attached it to a tab that was right behind the intake. All F30s have it, but I have seen some F30s with a different spec that utilize that factory tab for something else. My tab was completely free in my case. The BMS catch can has multiple holes on top to screw on the bracket from, so just pick the one that works best, for me it was the one on the corner. It might seem a little sketchy but I have had 0 issues with this and it is very sturdy, just make sure to torque it down properly and you'll be fine. From there I just cut down the hoses length to match the new location and done! Took me 15 minutes. (Sorry I don't know how to flip the images vertically)