Hey guys-- I could use a 2nd set of eyes for these logs. Car is Gen 1 B58 8AT with Alabama pump 93 gas, and a high flow cat dp. I've been running BM3's OTS Stage 1 93 tune (even with High flow cat thinking it would be easier on the motor).
I did 2 pulls: a 2nd to 6th and a 3rd to 6th. Had a knock event in the 2nd to 6th pull when I shift to 5th which is concerning and also timing looks to exceed normal deviation. I know BM3 typically runs hot, and I'm thinking it's best to just flash to a 91 tune and use 93 pump. Curious what ya'lls thoughts are.
2nd to 6th (w/ knock event and whacky timing):
https://www.bootmod3.net/log?id=6420...729b8bf2cee1a2
3rd to 6th (No knock but whacky timing corrections):
https://www.bootmod3.net/log?id=6420...90c6b2c46455aa
Edit: Meant to mention I replaced plugs with OEM about 1k miles ago, car consistently uses Shell 93, and ~98k miles (50k of said miles with this tune).