|
Did this over the weekend. I was able to get the OEM markers off pretty easily using some Turtle Wax Adhesive Remover spray and a screwdriver from the back side of the reflector.
But now I'm having a very annoying issue. After cleaning off all the old molding tape and even lightly sanding down the inside of the bumper to get ALL the residue off, my reflectors are not sticking to the bumper all the way. on the m sport, the long edge closer to the wheel has pulled away from the reflector adhesive and won't stay no matter how long i hold it pressed together.
Anyone else have this issue? Thinking about redoing this whole thing and carefully using betalink or something to make the reflector stick all the way around.
|