Quote:
Originally Posted by B58
I hate to revive a old thread rather then making a new one, but was the installation hard? The lip I received only has a few holes drilled in the bottom, but not the top where the bolts should hold the lip together. I can’t seem to find a write up on this.
|
Unfortunately I do not remember if there are holes in there or not. I should be taking it off this weekend though (it is cracked and broken), so i should be able to tell you better.
As for the install, i believe the two side bolts (at the very ends) can be re-used as they line-up with the bumper bolts.
The rest i used a combination of sheet-metal screws that i screwed directly into the bumper and some pop-in expanding plastic clips. I wish there were a nice write-up/install, unfortunately there is not, and the lips don't come with ANY instructions... Ridiculous