You may have to take it back to the shop that installed it for you to have them check everything over.
Surely theyd do it free of charge as a "warranty job" for their labour. Wouldn't be too hard to make sure everything is seated well.
My experience was when i installed my CP as the first mod, the CP at the intercooler side didnt have the c clip all the way in. It looked ok but under throttle i could hear a sound like air escaping. I had a lookover and could push the pipe in a little further and the clip seated more flush. No sounds after that. It may look ok idle but may be loose under throttle. YMMV. Good luck
|