Quote:
Originally Posted by xasomerh
thanks shawnsheridan
all works fine BUT i did the mistake
i send you PM but i write it also here 
shawn thanks for files
ONE QUESTION PLEASEEEEEEEEEE
i read all ecu's and thanks for that.
BUT
i tried to fdl code FEM BODY and the first time i success it but i press code and not fdl code ( also car shut down when coding maybe this makes that issue) as usuall by my mistake and now i read all ecu's except FEM BODY
i had many months to do and did it the mistake with code.
can i read again the FEM BODY????????
i tried to delete and paste again PSDZdata but same Isuue...... FEM BODY red error
THANKS IN ADVANCE
P.s
must do this steps as i show in other post ????? |
There is nothing wrong if you hit "Code" on FEM_BODY, That resets ECU to factory settings. It is a problem though is you hit "Code Default values" or if you hit "Code" on Top of SVT where VIN is instead of FEM_BODY specifically, as then every ECU would be reset, one by one, and if Motor was running, car would stall out when DME was processed, and most likely corrupt DME CAFD.
If FEM_BODY has missing or corrupted CAFD you must try and inject CAFD into ECU and VO Code it.
Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on desired FEM_BODY => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown => Select OK => Right-Click on FEM_BODY (the ECU itself not the underlying CAFD) => Select CODE.