Quote:
Originally Posted by Lancelot
Dip switches are of no use here;
I had the same issue, and it's gone since I restarted my configuration from scratch, instead of bimmertech files.
I think it is related to the signal input detection switches, they are supposed to switch if a signal is above a given threshold => try to disable auto switching altogether and see if that works.
DCM Menu => Signal Management tab => AUX source selection set to manual and see if that resolves.
|
I am running the BavStage1 tune provided by Nelson. At about 75% volume I experience the same thing that other's are experiencing.
After resetting can I load a bimmertech tune?