drilling through that plastic bumper is the easiest thing in the world. Like going through butter. easiest way is to
1) hold the lip up against the bumper - it fits like a glove so no guess work as to where it goes
2) use a sharpie and mark the spot on the bumper through the hole in the lip
3) drill
The hardest part might be needing a second pair of hands to hold the bumper in place while you mark.... or getting the car up high enough so that you get a drill up underneath there. You might be able to get high up enough just driving over a 2x12 or two. If you go more than one, nail them together for stability.
|