Quote:
Originally Posted by cfm56d7b
Quote:
Originally Posted by Watsey
This is one of the big disadvantages of dampers such as KW which use independent adjusters for compression and rebound, but which are located at different ends of the dampers. It's not too much of a problem for the fronts (because the adjusters can be accessed from inside the engine bay) but getting to the rear top adjusters is a PITA.
It's one of the main reasons that I avoided KW (and ACS rebranded) and looked at Bilstein and Ohlins - adjuster(s) are at the bottom of the damper body.
|
I agree. As much as I like KW SC coilovers, I wish KW were to move adjustment controls to the bottom.
|
Well KW does have controls on the bottom, it's the bump control. Their rebound is on the top. It would be easier for us if the rear shocks had rebound elsewhere, but it may be a packaging or design issue for KW that keeps that from happening.