Quote:
Originally Posted by Ringway007
Hi guys,
If anyone wants to know how to enable ENHANCED BLUETOOTH using the BIMMERCODE app with NBT head-unit here are the instructions to follow;
1. Connect your OBD connector to your car.
2.Start by opening the BIMMERCODE app on your phone and select Headunit HU_NBT
3.Select expert mode and change the parameters below, please change exactly as it states.
HU_NBT > AUDIO_TUNER_TRAFFIC 3002 > AUDIO_OFFSET = aktiv
HU_NBT > AUDIO_TUNER_TRAFFIC 3002 > MICROPHONE_NUMBER = wert_2
HU_NBT > EXBOX 3001 > AUX1_IN_HU = wert_255 [Default]
HU_NBT > EXBOX 3001 > USB_AVAILABLE = aktiv
HU_NBT > HMI 3000 > CDMM_USB_AUDIO = all
HU_NBT > HMI 3000 > SVS = nicht_aktiv [Default]
HU_NBT > HMI 3000 > SYSTEM_TTS = nicht_aktiv [Default]
HU_NBT > SYSTEM_EINSTELLUNGEN 3004 > SOFTWARE_UPDATE_ASSISTANT = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > ADRESSBOOK = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > API_CAR_TYPE_IPOD_LOGO = bmw
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > API_MP4_ON_OFF = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > API_USB_VIDEO = none [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > AUDIO_NOTES_EIN_AUS = nicht_aktiv [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > AUDIO_PLAYER_ON_OFF = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > BLUETOOTH_2ND_HFP = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > BT_MODUL_ON_OFF = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > CALENDAR_EIN_AUS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > CE_DEVICE_SPEECH_RECOGNITION = nicht_aktiv [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > CONTACT_BOOK_PICTURES = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > CONTACTS_EIN_AUS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > DATACOMM_CSIM = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > DUN_PROFILE = nicht_aktiv [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > EMAIL_EIN_AUS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > ENT_BTAS_BROWSING = nicht_aktiv [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > ENT_BTAS_IAP = nicht_aktiv [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > ENT_BTAS_METADATA = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > EXTERNAL_CALL_LISTS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > MACRO_PIM = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > PAN_PROFILE = nicht_aktiv [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > PHONE_CONFERENCE_CALL = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > PHONE_OBJPUSH_MENUE = nicht_aktiv [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > PHONE_RESPONSE_HOLD = nicht_aktiv [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > PHONE_TYPE = internal_phone
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > PIM_BILDER_EIN_AUS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > PIM_NEW_ELEMENT_AUDIO_NOTE = nicht_aktiv [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > PIM_NEW_ELEMENT_EMAIL = nicht_aktiv [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > PIM_NEW_ELEMENT_SMS = nicht_aktiv [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > PIM_NEW_ELEMENT_VOICE_EMAIL = nicht_aktiv [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > PIM_SPEECH_TO_TEXT = nicht_aktiv [Default]
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > REMINDER_EIN_AUS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > SINGLE_OR_MULTILINK = multilink
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > SMS_EIN_AUS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > SWUP_SOURCE_USBMSCDD = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > TASK_EIN_AUS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > TEXT_NOTES_EIN_AUS = aktiv
HU_NBT > TELEFON_TELEMATIK_ONLINE 3003 > TWO_PHONES_PARALLEL = aktiv
Lets know how you get on!
|
This works on the NBT unit tried it today. However I have one issue now my usb in the arm rest seems to be acting funny when I try and charge my phone (flash drive work normally) when the phone is plugged in it charges and stop charges whole time, I reverted the backup and seems to be charging again. Do you perhaps know what value might be affecting the usb in arm rest?