Pulled the trigger on going deeper into the track build... once again, GMP in Charlotte is doing the build. Things scheduled for June install:
Expert@ApexRaceParts
EC-7 18x9 ET35 front
EC-7 18x9.5 ET43 rear
Michelin Pilot Sport Cup 2
245/40 front
265/35 rear
Ohlins Performance Road & Track coilover Kit w/ EDC delete
Hotchkis adjustable sway bar end links, front and rear
M3 front lower control arms
Ground Control camber plates
StopTech stainless brake lines w/ Castrol SRF fluid
G-Loc R8 front brake pads
G-Loc GS-1 rear brake pads
Vorsteiner front under spoiler
Schroth Rallye 4 point harness
Plus a few maintenance items... oils/filters... and will definitely be getting her aligned for the track. I'll be going for:
-2.2° front camber
-1° front toe
-1.8° rear camber
0° rear toe
I'll be looking to set ride height low... probably to the point of no gap between fender and top of tire. Dampers will be set to the stiffer end for sure.
Of course, I'll modify this depending on if things rub... but we're suspecting it won't based upon feedback.
Yewwwww!! Gonna be a handling machine soon...
__________________
/// F80 M3 CS ///
|