I have a set of staggered 19 Zito bronze ZF03s. Bolt pattern 5x120. They were going to go on my BMW F31 but now I am going a different route. The fronts are 19x9 and the rears are 19x10. I have not installed on my car but the original owner tried to Install on 135i and they would not fit due to the 1 series being so compact. I have verified offsets with other BMW Owners with similar set ups and they run 265/35/19 tires in the rear and 235/40/19 in the front with no issues. The rims are in great condition but do have some small Imperfections from moving them in the garage, you have to look at them from a foot away to notice anything. 1 rim has scratches on back lip from previous owner of rims where it rubbed on the upper control arm, I would assume you cant see the scratches when its on the car, this why the rims are discounted. These are special ordered rims and were quite pricey new. I have center caps and valve stems. Let me know if you have any questions.