Hi,
Did you ever overcome the issue of the front PDC showing up only on the rear animation?
I have the same issue and my front PDC was retrofitted by the previous owner and I want to solve this.
Also, the PDC button was not installed. So I ordered the center console unit and want to add the wire from Pin 1 to the ICM Pin 28. Which thickness wire is used here? Anybody can assist with this.
Thanx
Quote:
Originally Posted by MoneyFor
Hi,
Thanks for replying, i had allready the rear PDC's and retrofitted the front. I added the 508 in SALAPA and tryed to VO code them into the car. But I ran in some problems that resulted in airbag en seatbelt errors. That is solved now so i can go back to try and code the front PDC's. My question is do I need to remove the 507 option and put only the 508 in them becase in my firt attempt I left the 507 also.
The best case was that the front PDC's worked after my coding but they did show up on the rear animation on the idrive and not on the front if you understand what I mean. While driving around coded like that some other options like my auto cruise control failed and the sound of the PDC went away completly. So i removed that coding and everything else just worked fine again.
gr K
|