View Single Post
      06-16-2021, 05:19 PM   #1
United Kingdom

Drives: 435i MS
Join Date: Sep 2016
Location: North

iTrader: (0)

10mm spacing at all?

I currently run 20mm hubcentric spacers on my 20" 405M ET47 rears.. this gives me a nice flush setup as my sidewalls are pretty flat.

Thing is the new wheels I'm looking at only come in 8.5 ET35, that's the equivalent of using a 12mm spacer on the stock 405M's so it won't be flush.

I have read one or two posts about being unable to run 10mm hubcentric spacers in the rear but nobody fully explains what causes the issue.

Is there any modding I can do to the hub to accept the 10mm spacer? It's a deal breaker for me as I'm finally set on a dream wheel design but they can only offer ET35 and I'd rather avoid having wheels sucked too far in
Current: F32 2015 435i M Sport - Alpine White - Scorpion catless DP, MPE with optional turboback straight pipe valve control, CF aero kit, Morph carbon valances, 405M's, 12 & 20mm spacers, retrofitted ICON headlights, retrofitted blackline LCI rear lights.
Appreciate 0