I have an awkward situation, firstly I have done the surround view retrofit and everything worked perfectly, after that I have done the park assist retrofit and I have this problem :
When I put into reverse the PDC work and beeps correctly rear and front, but there is no response on the screen.
I cannot activate the PDC with the button near the gear box however the green light appears underneath the button but still no response on the screen.
When I push the camera button I get the view from the side cameras, but If I firstly activate the green light underneath PDC button trying to activate the PDC then the camera button is inactive.
I should also add that my car had the front, rear PDC and rear camera factory.
I have added VO : 5DP and 5DL
BUT one day I put into reverse and this happened on the screen:
https://ibb.co/bXUNHv
IMO this looks like the REM conflicts with PMA and that is why i get nothing on the screen, shouldn’t I remove something from the VO ?
Naturally i moved the PDC wires form REM to PMA
