Quote:
|
Originally Posted by MoneyFor
Quote:
Originally Posted by roxxor
I would double check everything against the pin connection list, it is shown here in my Rear PDC DIY. The colors listed are the rear pins but its easy to identify the spots for the front ones. |
Hi Roxxor,
The wiring was the first thing i double checked when my first attempt was failed. I even called the supplier from my retrofitharness to confirm the colorcoding/n° pins where correct.
Information from the supplier ( copied from BMW retrofit manual ) and the way it is connected
F30/F31 cars only
Connect branches A2–A7 as follows to plug A174*14B,
SW 54-pin socket casing, on REM A174:
- Branch A2, GN/WS cable, to PIN 48
- Branch A3, BR/WS cable, to PIN 36
- Branch A4, BL/RT cable, to PIN 53
- Branch A5, BL/SW cable, to PIN 40
- Branch A6, BL/BR cable, to PIN 41
- Branch A7, BL/GN cable, to PIN 52
Connect plug A174*14B to REM A174.
rg K |
hi did you ever get to the bottom of this as I'm getting exactly the same message