[medlyleeds]

Hi

Just a quick question. I had a set (wishbone and trailing arm) of these installed recently on the front of a BMW F30 but the wishbone ones (camber adjustment) have failed on both sides in a matter of months and hardly any mileage. What was the problem with yours? I have not used mine to introduce a large amount of negative camber, only to adjust out a slight bit of cross camber (maybe like 1/4 a degree)

Mine now have a large amount of play in them but the bolts appear to be tight. The mechanic thinks the bushes themselves have failed, not the eccentric mechanism.

They are getting replaced this week so maybe the reason for failure will become apparent.

Thanks