Quote:
Originally Posted by Djmf30
Quote:
Originally Posted by david51
Quote:
Originally Posted by Djmf30
Hi yes I did connect blue and green cable to rem as instructed and coded rem 3061 for led flickering
I get no lamp errors on dash, all 4 pieces of the tail lights power on but when using the turn signals I don't see the inner led working.
|
After adding HELC you have right click CODE on REM module ?
connect the wire of the inner light left to REM 174*12b pin17 and
and the wire of the inner light right to REM 174*14b pin12 |
Yes I fdl coded rem after adding HELC but that made no change. Yes I saw another post where they instead wired the inner tails to rem 174 12b pin 17 snd 174 14b pin 12 as you noted below. I know that's where the outer tails get power for turn signals. Sounds like that will be final solution. Be back with results thanks for the help |
Ok guys I swapped a3 and a4 inner tail cables from rem a174 13b to a174 12b and 13b pin 12 and 17 and that solved the problem. Inner tail led now blinks along with outer piece. My lci tail retro is now complete
Good learning experience but well worth it
Just waiting for replacement drip rails as pre lci rails aren't flushed to the tail lights.
