Quote:
Originally Posted by david51
hello
Before buying the next room (Switch unit steering column)
just use the unused connectors of the airbag:
+ slot 1 (red/Black)
- Slot 3 (brown)
must displacement connectors power and ground to the heated steering wheel
|
Hey guys, I am stuck at the above stage with my retrofit. Where did you get the red and yellow/white wires with white end connector (as photo) to put into the airbag connector to pick up the supply? My wheel heating control module has black wires and some how I need to link those to pins 1 & 3 of the airbag connector.
Many thanks.