BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST - View Single Post - Heated Steering Wheel Function Retrofit discussion and sharing

doughboy · 09-03-2016, 01:31 PM

Hi David51, really thank you very much for the reply. Mine is an F06 M6 Gran coupe.

That confuses me a little. I was thinking I needed to get the supply to the black 2 wire connector which is the supply input to the heater control module. (A83*4B). (Left side of photo below)

That is a black 4 pole (2 wired) connector that would go into the column connector A83*4B pins 1&4 if it was populated.

You show a red and yellow wire and a white connector? Also where can I get the female contacts to fit in the airbag connector?

09-03-2016, 01:31 PM	#20
doughboy Major General 1545 Rep 8,970 Posts Drives: 2018 M2 Comp 6MT Join Date: Jan 2009 Location: UK iTrader: (2)	Hi David51, really thank you very much for the reply. Mine is an F06 M6 Gran coupe. That confuses me a little. I was thinking I needed to get the supply to the black 2 wire connector which is the supply input to the heater control module. (A834B). (Left side of photo below) That is a black 4 pole (2 wired) connector that would go into the column connector A834B pins 1&4 if it was populated. You show a red and yellow wire and a white connector? Also where can I get the female contacts to fit in the airbag connector? Attached Images Last edited by doughboy; 09-03-2016 at 03:13 PM..
	Appreciate 1 Wood11221.50 Quote