Quote:
Originally Posted by mhhforyou
Yes you need a ecu. Its called VDC Ecu. Its placed in the trunk direct above the Batterie.
For example: http://www.ebay.de/itm/BMW-F20-F21-F...4AAOSwfVpYu1Fj
You need the plug for the ECU(hard to find used) and have to make a harness to every strut.
5 wires for each strut in the front and 2 wires for each strut in the rear. 2 of the wires to every strut have to be twisted as they are for the damper valves.
You need the 4 struts depending your car model, 1x anti roll bar link front right 6 792 212 and 2x acceleration sensors 6 871 465. Also adaptor wires from the strut to the body.
Rear 2x 6 852 924
Front 2x 6 793 850 and 2x 6 793 848
I got all from ebay to very good prices because normally no one needs this parts used.
Effort is big because of the harness that goes to through the complete car.
Regards |
Great job !
Could you write a complete list of parts, you needed for this adaptive suspension upgrade, retrofit ? The main car ECU must be conected with adaptive ECU ?
I want to upgrade my car too, if you could, please write me an email. (mike.basista@gmail.com)