View Single Post
      02-02-2020, 03:22 AM   #321
OzBMR
Captain
OzBMR's Avatar
Australia
575
Rep
585
Posts

Drives: BMW M140i
Join Date: Aug 2019
Location: Brisbane, Australia

iTrader: (0)

Quote:
Originally Posted by SC_B5X View Post
So I turned off DSC to log (even though I wasn't spinning) and the corrections completely disappeared. Got a revision today and we turned up the boost a bit as well as increased timing.

Log
https://datazap.me/u/richmichael97/w...33-34-35-36-37
Looking good. Interesting about DSC.

I created a 340i car profile for Virtual Dyno and here's an output based on your 4th gear run. If you can get a 4th gear 100% accelerator from about 2500RPM it'd be good. This one only went 100% from about 3600 RPM. Looks like about 520 whp and 640Nm. Better than stock turbo now!

As the Dorch Stage 1 looks maxed out at that boost level with E40, what about going back to E30 and shoot for 18 PSI up to 4500, then 20 PSI by 5000 RPM, 22 PSI by 6000 and up to 24 PSI up top?

__________________
Tesla Model 3 Performance 0 - 60mph 3.1s
M140i LCI Mineral Grey
Dorch Stage 2 HPFP, CG Precision DS-1, XHP, MHD Stage 2 HPFP E30 @ E42 100 - 200 6.96s
Quarter mile 10.93@127mph

Last edited by OzBMR; 02-02-2020 at 05:33 AM..
Appreciate 0