Quote:
Originally Posted by gecko.ch
So i have new information.
I have the park assist. The 4 sensors in front/back are for the pdc and the additional 2 sensors are for the park assist „flankenschutz“
My current config are:
3001 exbox > communication_parkmaster > gen2 0x02
3001 exbox > macro_pma_einparken > gen2_ohne_konf 0x03
3001 exbox > auto_pdc > aktiv 0x01
3001 exbox > pdc_flankenschutz > aktiv 0x01
3001 exbox > pdc_generation > gen2 0x01
3001 exbox > pdc_sensor_hinten > 4_sensoren 0x01
3001 exbox > pdc_sensor_vorn > 4_sensoren 0x01
So looks my pdc, the beep works, but no sensor lines only the 4 corners...
|
For my vehicle, all of the listed parameters are the same except for:
3001 exbox > pdc_generation > gen1 0x00